Y-Valve. The Jabsco Y-Valve is designed to provide flexibility of onboard waste management by diverting waste either into an onboard holding tank or directly overboard where legal to do so. Check local and Federal regulations to determine where direct overboard discharge of untreated waste is permitted. No overboard discharge of untreated waste is allowed within three miles of shore. Some near shore areas and inland areas are designated as No-Discharge Zones where the discharge of any onboard waste, even treated waste is strictly prohibited. Many of these areas require a waste retention system that can be positively secured in an onboard retention mode. The Jabsco Y- Valve accommodates this requirement by providing the ability to add a padlock that secures the selector handle in either direction to ensure waste is directed to an onboard holding tank. The Y-Valve may also be used to direct waste from a holding tank to an onboard waste discharge pump for holding tank evacuation or, al The Jabsco Y-Valve is designed to provide flexibility of onboard waste management by diverting waste The Y- Valve may also be used in a bilge pumping system to select between two separate bilge pickups Chemical and corrosion resistant polypropylene and stainless steel construction. Selector lever can Ports can be rotated so discharge plumbing can be routed away in parallel, at 900 or in opposite dir Optional shaft extension allows valve to be mounted through a bulkhead up to 1-3/4 thick with only