Wall Mount Mechanical Temperature Alert for All Sensaphone Remote Monitors Wall mount FGD-0022 mechanical temperature sensor with alarm for Sensaphone monitor system units detect if air temperature is too high or too low. Alarm limits adjust from 30 degrees to 130 degrees F. Works with all Sensaphone products. Wire not included. Cannot be used to monitor temperature readings remotely clearly display temperature readings on site. Trigger local alarms when dangerous temperatures are sensed. Select an acceptable temperature range by setting the adjustable high and low limit arms on the front of the device with a screwdriver. Install units away from windows, doors, or heat sources that could cause an inaccurate reading of air temperature. To protect a building against freeze damage, always install at least one device on every floor or level. If the building already has an energy management system, an easy rule of thumb to follow is to install a unit near each thermostat. Connect the TEMP ALERTs front mounted terminals to the Sensaphone system using 22-18 AWG twisted pair cable. You can add additional units to one Sensaphone zone by wiring them together. Sensaphone Temperature Alert FGD-0022 Features Used on a dry contact input to detect high and low temperature limits. The TEMP ALERT uses normally open N.O. dry contacts rated at 50mA at 12VDC. Causes dial-out when temperature reaches high or low limit. Dimensions 6.25 x 3.25 x 2 Temperature Range 30 degrees to 130 degreesF 34 degrees to 54 degreesC Weight 6 ounces Accuracy /- 3 degreesF Housing ABS Plastic Compatibility All Sensaphone models Package Contents x1 Temperature alert x2 Plastic drywall anchors x2 #6 Metal tapping screws This item ships from a separate warehouse and may require extra time for delivery.