Sensaphone IMS Smoke Detector for Fire Safety Add a smoke detector sensor to your Sensaphone IMS-4000 Host or Node not included as a smoke monitor for indoor environments. This Sensaphone 4000 accessory can be installed near the IMS-4000 or in a remote location. The IMS-4862 Smoke Detector Sensor connects only to the IMS-4000 Host or Node to detect smoke indoors. Attach the smoke sensor to a wall or ceiling hardware not included . The Smoke Detector Sensor includes an attached 7' cable with an RJ-45 plug on the end. If the sensor is close to the IMS-4000 Host or Node, plug the sensor directly to an IMS environmental input. If the cable is too short, use the included RJ-45 adaptor and a longer patch cable to extend the length. For applications where the sensor may be far from the IMS unit, you may utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network viaan RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the Host or Node environment input. Specifications of Sensaphone IMS Smoke Detector Temperature 32- 122 degrees F Humidity 5-90% RH non-condensing Power Supply 120VAC 60Hz Current Consumption 100mA output load Over-Current Protection 15A Breaker Dimensions 6.11 h x 6.11 w x 1.89 d Weight 8 lbs. Manufactured by Sensaphone 3 year manufacturer's warranty. Name IMS Smoke Detector Sensor Product # IMS-4862 Sensitivity 2.0 /- .37% .39% /ft. Heat sensor rating Fixed 135 degreesF 57 degreesC rate of rise 15 degreesF/min. 8.3 degreesC/min. Maximum ambient temperature 100 degreesF 37.8 degreesC Power-up time 15 seconds Housing White plastic Housing dimensions 6.1? d x 1.9? h Compatibility IMS-4000, IMS-4000 Node, and IMS-1000 Package Contents x1 Smoke Detector x1 14' Cat5 Patch Cable This item ships from a separate warehouse and may require extra time for delivery.