Cross-sectional profile. Setting new standards. The Megaforce2 design was optimized from ground up, to give exceptional torsional stiffness combined with minimal weight when used in combination with wide and super wide 31.8 mtb bars and with the new tapered E2 steerer tubes with 1 1/8th stem interface diameter. Similar torsional stiffness values as our large volume Force 1.5, but at the same time less weight than our already light weight Superforce 132g at 70mm stem length. Low profile for a minimum built height above the headset, and the first of its kind to be greater in width than profile height, dimensions being 36 x 42 mm. Noticeably preciser steering control with super wide bars. Reduction of swaying tendancy out-of-phase while retaining the dampened vertical compliance in-phase at the bar ends. The new combination of extreme proportioned cross sectional stem body, while possessing a tangential transition of the 1 1/8th fork interface clamp allows a deeper recessing of the stem clamping bolts facing the knees than previously possible. Superfit sizing system with 6 with FlipFlop design stem angle ideal for the current frame's reduced steerer tube lengths geometries. Six fine tuning lengths from 30 mm to 80 mm in 10 mm ! intervals. Optimized to give exceptional torsional stiffness with minimal weight Low profile for a minimum build height above the headset VR-3 The Red Monster tested with bars up to 800mm wide and approved with no restrictions on rider 36mm stack height 122 grams