All-In-One lighting control system with on/off touch panel and motion sensor, for use with WAC Lighting 12V or 24V low voltage class 2 transformer. Three custom settings of lighting control include 1. Touch and Sensor Touch panel turns the luminaire on/off manually while the motion sensor turns it off when the space is vacant. 2. Touch Touch panel turns the luminaire on/off manually. to shut off after last detection of motion 3. Sensor Motion sensor turns the luminaire on/off autonomously. Motion Sensor Detects within 16 foot range. Integral light off timer can be set between 10 seconds and 20 minutes. to shut off after last detection of motion. Programmed with three functions TOUCH and SENSOR To activate both motion sensor and touch switch. TOUCH Only touch switch, inactivate motion sensor. SENSOR Only motion sensor, inactivate touch switch. Built-in adjustable timer on motion sensor allows automatic shut off after the sensor covered area is vacated. Maximum time delay is 20 minutes 20MIN , minimum is 10 seconds 10S . Motion sensor supplied with 18ft wire and touch panel supplied with 8ft wire. May be cut to desired length. Lengthening of wire is not recommended as will decrease sensitivity. Two different mounting options screw or double sided tape mounting for all under cabinet application included. Choose appropriate mounting option for rough, smooth and curved surfaces. Designed for indoor under cabinet application. Recommended ambient temperature is 14 to 122 F 10 to 50 C 5 year WAC Lighting product warranty Black Finish Voltage 120V Part of the Control System Collection Listing Type Damp UL/ETL Listed Includes a Touch Panel, an Occupancy Sensor, and a Controller. AC/DC input at 12V 60W Max or 24V 96W Max . Connect on secondary side of driver/transformer. Warranty Info 5 Years Components/2 Years Finish Housing/Cutout Dimensions Please note that this product is designed for use in the United States only 110 volt wiring , and may not work properly outside of the United States.